Novotechnik SP2801100002001

Description

Novotechnik SP2801 100 002 001 price in bangladesh importer in bangladesh supplier in bangladesh bd 

The Novotechnik SP2801100002001 is a part of the SP2800 series of potentiometers, which are precision rotational sensors. These potentiometers are commonly used in various industrial applications to measure angular position. Here’s a breakdown of the typical parameters for this model:

Detailed Parameters for SP2801100002001:

1. SP2801:
   • Model series (SP2801) from Novotechnik’s SP2800 line.
   • These are precision potentiometers designed for accurate angle measurement.
   • SP2800 potentiometers typically offer continuous rotation with no stops and feature a very compact design with high mechanical durability.
2. 100:
   • Refers to the electrical range or resistance in ohms.
   • This typically indicates that the potentiometer has a 100-ohm resistance element, but it could also refer to a 100° electrical range if talking about angular displacement. Confirmation would be needed from a datasheet.
3. 002:
   • Usually specifies the output configuration or additional customization for the potentiometer.
   • It could be related to the taper (linear or non-linear response) or special wiring configurations.
4. 001:
   • Likely a special product code indicating specific mechanical or electrical features, such as the type of shaft or mounting, or particular environmental protections like IP ratings or temperature tolerance.

General Parameters for the SP2800 Series Potentiometers:

• Measurement Principle: Resistive potentiometer, which converts rotational movement into a voltage output proportional to the angular position.
• Electrical Angle: Typically up to 340°, providing nearly continuous rotation for position measurement.
• Resolution: Essentially infinite for practical purposes because it’s a potentiometer; the output is as precise as the movement and the measuring device’s resolution.
• Mechanical Angle: Typically 360° continuous rotation.
• Repeatability: Very high precision, often within a 0.01° range.
• Operating Temperature: The SP2800 series usually operates between -40°C to +100°C.
• Housing: The potentiometers are typically made from a rugged, compact material suited for industrial environments.
• Shaft Type: Generally features a 6 mm shaft diameter, but this can vary by specific model.

This model would typically be used in applications that require precision rotational measurement, such as in industrial machinery, automotive applications, or robotics.